Gael InMoov vs PAL TALOS
Generated from the registry · revision 2026-09-26 · openness out of 100
No height, mass, DOF or payload figure is sourced for both InMoov and TALOS yet. Openness score: InMoov 70, TALOS 30 (of 100); only InMoov publishes CAD, BOM and FW; only TALOS publishes SIM. Availability: InMoov diy build, TALOS buy.
01
Side by side
■ rows differ| Field | Gael LangevinGael InMoov | PAL RoboticsPAL TALOS | Δ first − second |
|---|---|---|---|
| Identity | |||
| Maker (differs) | Gael Langevin | PAL Robotics | |
| Class | Humanoid | Humanoid | |
| Status | Active | Active | |
| Availability (differs) | DIY build | Buy | |
| Country (differs) | France | Spain | |
| Year (differs) | 2012 | 2017 | |
| Specifications | |||
| Height | —unsourced | 175cm | |
| Mass | —unsourced | 95kg | |
| Degrees of freedom | —unsourced | 32 | |
| Payload | —unsourced | 6kg | |
| Top speed | —unsourced | —unsourced | |
| Runtime | —unsourced | 90min | |
| Battery capacity | —unsourced | —unsourced | |
| Price | —unsourced | —unsourced | |
| Actuators (differs) | hobby servos | torque-controlled joints with torque sensors | |
| Compute (differs) | Arduino + PC running MyRobotLab | Ubuntu LTS real-time, EtherCAT 2 kHz | |
| Sensors | —unsourced | joint torque sensors, F/T wrists and ankles, IMU | |
| Openness and provenance | |||
| Openness bar | |||
| Openness score (differs) | 70/ 100 | 30/ 100 | +40 |
| CAD (25) (differs) | public | not public | |
| Bill of materials (20) (differs) | public | not public | |
| Sim model (URDF/MJCF) (20) (differs) | not public | public | |
| Firmware (15) (differs) | public | not public | |
| Software (10) | public | public | |
| Trained policies (10) | not public | not public | |
| Verification level (differs) | L1 | L2 | |
| Sources (differs) | 6 | 2 | |
| Last checked (differs) | 2026-09-25 | 2026-09-24 | |
A dash is an unsourced figure, not zero. Sources for each robot are listed on its spec sheet: InMoov, TALOS.
02