Hyperspawn Dropbear vs Unitree H1
Generated from the registry · revision 2026-09-26 · openness out of 100
Dropbear is 2 kg lighter (45 vs 47 kg) than Unitree H1. Dropbear has 9 more degrees of freedom (32 vs 23) than Unitree H1. Both list the same height (180 cm). Openness score: Dropbear 100, Unitree H1 40 (of 100); only Dropbear publishes CAD, BOM and FW. Availability: Dropbear preorder, Unitree H1 buy.
01
Side by side
■ rows differ| Field | Hyperspawn RoboticsHyperspawn Dropbear | Unitree RoboticsUnitree H1 | Δ first − second |
|---|---|---|---|
| Identity | |||
| Maker (differs) | Hyperspawn Robotics | Unitree Robotics | |
| Class | Humanoid | Humanoid | |
| Status | Active | Active | |
| Availability (differs) | Preorder | Buy | |
| Country (differs) | India | China | |
| Year | 2023 | 2023 | |
| Specifications | |||
| Height | 180cm | 180cm | = |
| Mass (differs) | 45kg | 47kg | −2 kg (-4%) |
| Degrees of freedom (differs) | 32 | 23 | +9 (+39%) |
| Payload | 5kg | —unsourced | |
| Top speed | —unsourced | 3.3m/s | |
| Runtime | 120min | —unsourced | |
| Battery capacity (differs) | 960Wh | 864Wh | +96 Wh (+11%) |
| Price | 9,999USD | —unsourced | |
| Actuators (differs) | MyActuator RMD-X10, RMD-X8, RMD-X6 and CEM-60 over 1 Mbit/s CAN (18 per the 2026 BOM; myactuator-can lists 12 RMD-X8 Pro, 4 RMD-X10 V3, 6 CEM-60); 6 NEMA 17 lead-screw steppers in the Stewart-platform neck. hyperspawn.ai: servo + QDD. | Unitree in-house electric joint motors | |
| Compute (differs) | NVIDIA Jetson AGX Orin 64GB (BOM; Orin NX 16GB alternative) plus one ESP32-DevKitC-V4 CAN node per limb. Kit: Raspberry Pi 5 base, Jetson Orin advanced. | Intel Core i5 standard; i7 or Jetson Orin NX optional | |
| Sensors (differs) | Intel RealSense D455f depth camera, IMU (center-IMU controller role), foot load cells (4x HX711 per foot, dropbear-feet), actuator encoders; five AS5600 magnetic angle sensors per leg controller (observation-safe firmware) | 3D LiDAR, depth camera | |
| Openness and provenance | |||
| Openness bar | |||
| Openness score (differs) | 100/ 100 | 40/ 100 | +60 |
| CAD (25) (differs) | public | not public | |
| Bill of materials (20) (differs) | public | not public | |
| Sim model (URDF/MJCF) (20) | public | public | |
| Firmware (15) (differs) | public | not public | |
| Software (10) | public | public | |
| Trained policies (10) | public | public | |
| Verification level | L2 | L2 | |
| Sources (differs) | 16 | 2 | |
| Last checked (differs) | 2026-09-25 | 2026-09-24 | |
A dash is an unsourced figure, not zero. Sources for each robot are listed on its spec sheet: Dropbear, Unitree H1.
02